Dedicated raw-material production line
- Fully automatic mixing with adjustable ratios
- Automatic metal-contaminant rejection
- Uniform blending and direct connection to sheet extrusion equipment
- Single-line capacity: 500–600 kg/h
Dedicated production systems
Equipment built around the material.
Seven equipment modules cover raw-material preparation, extrusion, printing, converting, assembly and closed-loop waste recovery.
Integrated by applicationIndividual machines or complete-line configurations are available. Final configuration, compliance and output depend on project engineering.
Sheet extrusion line
- Fully automatic, high-efficiency sheet extrusion
- Twin-screw extrusion with multilayer co-extrusion capability
- Maximum width: 2,600 mm
- Thickness: 1.8–7 mm
- Single-line capacity: 500–700 kg/h at 3 mm thickness
- Optimized for dedicated raw material; customizable
6+2 high-definition flexographic printing line
- Six colors plus varnish plus QR-code printing
- Unique code per box for anti-counterfeit traceability
- Strong ink adhesion; resistant to peeling, scratching and fading
- Registered color printing with clear layered graphics
- Maximum print width: 2,800 mm
- Maximum print length: 1,150 mm
- Maximum resolution: 1,000 DPI
- Customizable
Rotary die-cutting line
- High die-cutting efficiency
- Uniform pressure
- For high-volume production of standard boxes
- Maximum processing width: 2,800 mm
- Maximum processing length: 1,300 mm
- Customizable
Flatbed die-cutting line
- Supports complex box structures
- Accurate creasing and clean cut edges
- Lower-cost dies and fast changeover
- For premium irregular boxes, short runs, multiple SKUs and frequent job changes
- Customizable
Automatic stitching, gluing and strapping line
- Integrated automatic feeding, folding correction, gluing, stitching, counting and stacking
- One-touch switching between stitching and gluing
- Food-grade adhesive; strong room-temperature bond with crack resistance
- Stated at 5–7 times faster than traditional stitching and gluing equipment
- Consistent stitch position and glue line
- Automatic fault detection; stops for missing staples or adhesive
- Customizable
Waste recycling line
- Melts die-cut waste and recovered sheet or boxes into raw-material pellets
- Reprocessed pellets can be fed directly into sheet extrusion
- Customizable